TEXAS ROOTS · WATER FOR WHAT COMES NEXT

Water for what comes next.

Water infrastructure for the places building tomorrow.

Explore our work
Pond at Southern Oaks RV Park, Aransas Pass · ponds built by Adam Schwenk · photo: Southern Oaks RV Resort

Texas roots · water for what comes next

Data center water retention, built from the ground up.

From roof runoff collection to lined holding ponds, earthwork and cooling-tower make-up planning.

See the data-center approach
Concept illustration, not an Evergrid project
01 / DATA CENTER WATER

Rainwater capture and holding ponds for data centers.

For data-center campuses, Evergrid proposes a joined-up scope: capture roof runoff, build the earthworks and lined holding ponds to retain it, then evaluate treatment, pumping and controls for cooling-tower make-up where engineering, water quality and local rules allow. It is a concept for each site, not a promise of a particular water yield or an installed Evergrid project.

Storage infrastructure

From metal cisterns to industrial-scale retention.

Concept illustration of a large corrugated steel cistern at ground level
02 / METAL CISTERNS

Metal water-retention cisterns

Plan above- or below-ground metal storage around roof area, usable capacity, treatment needs, maintenance access and the site's water demand. Tank type and materials need engineering review. Image is a concept illustration, not a completed Evergrid project or a capacity specification.

Original illustration of an elevated water tank
03 / WATER TOWERS

Elevated water storage

Water towers and elevated tanks for suitable sites, developed with qualified structural and water-system engineers and specialist fabricators.

Original illustration of lined industrial water holding ponds
04 / INDUSTRIAL RETENTION

Large commercial and industrial water storage

Earthwork, lined ponds, reservoirs and holding systems for large facilities. Size, liner, drainage, water quality, reuse options and permits are site-specific decisions.

What we do

Built around the site.
Not a one-size-fits-all tank.

Our proposed core services focus on commercial rainwater capture, earthwork, lined storage and construction. Every project depends on site conditions, qualified design and local approvals.

Illustration of rainwater cistern at Texas ranch
01 / COMMERCIAL CAPTURE

Large-site rainwater systems

Roof runoff collection for commercial buildings and data-center campuses, with site-specific filtration, pumping, treatment and controls. AC condensate and atmospheric generation are additional options to evaluate.

Illustration of ranch reservoir and storage system
02 / STORAGE OPTIONS

Above- and below-ground cisterns

Retention cisterns and tanks selected for volume, access, water quality and the needs of the property.

Illustration of lined retention pond construction
03 / EARTHWORK + LINERS

Holding ponds and reservoirs

Earthwork for lined holding and retention ponds, reservoirs and small lakes, with clay or synthetic lining, drainage and erosion control to suit the design.

Illustration of small elevated water tank
04 / ELEVATED

Small water towers

Elevated tanks developed with qualified structural and water-system engineers and specialist fabricators for suitable sites.

All images are original concept illustrations, not completed Evergrid projects or engineering designs.

From old system to new

05 / DECOMMISSIONING + REPLACEMENT

Take the old tank down. Build the next one right.

Evergrid Water and New Energy can decommission an old water tank and replace the system with new storage. We plan the shutdown, dismantling, haul-off and disposal of the existing tank, then scope the new holding tank or reservoir, liner and metalwork around the needs of the site.

Discuss a replacement project
01 / OLD SYSTEM

Water tank decommissioning

Assess the existing tank and its connections, plan the shutdown and dismantling, and arrange removal, haul-off and appropriate disposal.

02 / NEW STORAGE

Tank and reservoir replacement

Replace worn-out storage with a new holding tank or reservoir. New liners, metal components and connections are scoped for the site rather than copied from the old system.

03 / FACILITIES

Facility and data-center tear-outs

Plan electrical decommissioning and removal of retired equipment and infrastructure with qualified trades and site-specific safety procedures.

04 / EQUIPMENT

Rigging and asset recovery

Coordinate equipment rigging and removal, and identify materials that may be suitable for reuse, resale or recycling. Recovery value depends on condition and market demand.

Each job starts with a site review. Disconnection, rigging, disposal, new storage design and installation depend on qualified trades, permits, condition and applicable rules.

Planning examples

Numbers before dirt moves.

These simple illustrations show how a project starts. They are not a site estimate, performance guarantee, engineered design or description of completed Evergrid projects.

Roof capture potential

Example: 1 inch of rain, 80% collection efficiency. Gallons = roof square feet × 0.623 × 0.8.

10,000 sq ft
4,984 gal
20,000 sq ft
9,968 gal
40,000 sq ft
19,936 gal

Storage planning

Example: usable storage divided by a hypothetical 5,000 gallons per day. Refill, losses and operating reserves excluded.

25,000 gal
5 days
50,000 gal
10 days
100,000 gal
20 days
Illustrative water storage earthwork

One name. A wider field of work.

Experience, brought together.

Evergrid Water is a proposed new business. Adam says the founders bring 30 to 40 years of field experience across electrical, construction and water-related work. He says they have excavators and earthmoving equipment for in-house work. That is founder experience, not decades of Evergrid operating history.

From Texas, the ambition is to serve projects nationwide and eventually worldwide. Each job needs site-specific engineering, permits, qualified trades, water-quality review and capacity planning.

From the field

Work behind the people.

Real photos of pond work shared by the people behind Evergrid Water. These jobs predate the new company.

Previously completed earthwork and water-filled pond
Pond earthwork and water storage - built by Roy
Water-filled pond with graded bank from prior work
Graded pond bank - built by Roy
Stone-walled pond with liner and water from prior work
Stone-lined water feature and liner work - built by Roy
Pond and fountain at Southern Oaks RV Resort in Aransas Pass
Southern Oaks RV Park, Aransas Pass - ponds built by Adam Schwenk. Photo: Southern Oaks RV Resort.
Southern Oaks RV Resort pond and fountain at sunset
Southern Oaks RV Park, Aransas Pass - ponds built by Adam Schwenk. Photo: Southern Oaks RV Resort.

Also for landscapes

Decorative ponds, thoughtfully built.

Ornamental water features are a smaller part of the offering. The two photographs below show illustrative design references, not work by Evergrid or its team.

Small planted ornamental garden pond, illustrative reference
Illustrative photo: Acabashi / Wikimedia Commons, CC BY-SA 4.0; resized for layout.
Lily pond and water plants, illustrative reference
Illustrative photo: Acabashi / Wikimedia Commons, CC BY-SA 4.0; resized for layout.

For homes and commercial properties

More ways to collect and use water.

For suitable roofs, collect rainwater into a tank, then evaluate filtration, pumping and reverse-osmosis treatment for the intended use. We can pipe air-conditioning condensate into storage. Adam estimates that one AC unit can yield about 2 to 10 gallons of water per day under suitable conditions; the amount varies with humidity, unit size and run time and must be measured at each site. Evergrid also installs atmospheric water generators sourced from China, with the equipment and output selected for local conditions. Drinking-water use requires appropriate engineering, water-quality testing, treatment and approvals; output and yield depend on local conditions.

Examples of atmospheric water generator equipment in a room
Atmospheric water generator equipment - illustrative reference, not an Evergrid installation. Ashvidia / Wikimedia Commons, CC BY-SA 3.0; photo resized.
WATER FROM AIR

See how an atmospheric generator works.

01Air inHumid air enters the unit
02CondenseMoisture collects on a cooled surface
03TreatWater is filtered and tested for its intended use
04StoreCollected water moves to storage

Actual output depends on humidity, temperature, equipment, run time and treatment requirements.

ANOTHER WATER SOURCE

AC condensate can add up across units.

Pipe suitable drain lines to a collection tank. Using Adam's illustrative 2-10 gallons per unit per day, five units could collect about 10-50 gallons per day under those conditions. It is a simple multiplication, not a site estimate or guaranteed yield; measure each system before sizing storage.

AC 1
AC 2
AC 3
AC 4
AC 5
↓
COLLECTION TANK
illustrative total: 10-50 gal/day

The other half of our name

New energy, built for the site.

Solar, storage and on-site backup for residential and commercial properties. Adam is a journeyman electrician and has installed solar systems. Evergrid plans each project around the electrical load, available space, utility requirements and long-term maintenance.

Solar panels across a roof, illustrative stock photo
Roof-mounted solar · illustrative photo, not an Evergrid project · Unsplash
Rows of ground-mounted solar panels in a field, illustrative stock photo
Ground-mounted array · illustrative photo, not an Evergrid project · Unsplash
01 / SOLAR

Residential and commercial solar

Roof, ground and pole mounts are options to assess by site. We can use Enphase equipment where it fits the design; panel layout, mounting and output depend on the roof or land, shading and load.

02 / BATTERY BACKUP

Store power for when it matters

Pair solar with battery backup and controls for selected loads, or design off-grid electricity where the site supports it. Battery size and available run time depend on a measured load and system design.

03 / GRID CONNECTION

Grid-tied solar and export

For grid-connected systems, evaluate exporting excess power. Interconnection, metering, credits and compensation depend on the local utility and its current rules; selling power is not guaranteed.

04 / GENERATORS

On-site standby power

Install generators as part of a site-specific backup plan. Size, fuel, location, transfer equipment and approvals are reviewed before work starts.

Enclosed standby generator installed outside, illustrative reference photo
Standby generator example. Illustrative photo, not Evergrid work. Gregsedits / Wikimedia Commons, CC BY-SA 3.0; image resized.
Solar + storage + backup

A practical mix of power sources.

Combine panels, battery backup, a grid connection and a generator only where the site needs them. The final equipment and installation method follow the load calculation and utility requirements.

Severe-weather protection

We also install storm shelters.

Evergrid Water installs underground storm shelters for severe-weather protection. Each tornado shelter needs a site-specific plan for location, access, drainage and installation. Shelter selection and design should be reviewed against applicable codes and the requirements of the site.

A shelter should not be called a FEMA safe room unless its design and installation meet FEMA criteria. Ask us about the site review and the shelter specifications before choosing a system.

Start the conversation

Tell us what your land
or facility needs.

Speak with Adam Schwenk about a water project. Call 505-550-8100.
Based in the Corpus Christi area. Serving Corpus Christi, San Patricio County and South Texas, with statewide data-center projects under consideration.
Email Adam: adam@evergridwater.com (active). Roy: roy@evergridwater.com is planned and not active yet; please call until Roy's routing is set up.